90 Degree Square Tube Die for 105 Standard Duty and Heavy Duty Tube and Pipe Bender (26.0 mm OD, 177.8 mm CLR) Round Tubing 83 cubic inches oil/minute output

83 cubic inches oil/minute output

In the graphic below you can watch the part being created as the values are entered in

and 2-1/2" Dimple Dies

1 x Keyed Center Roll

Minimum Inside Radius: Approximately 12” (304

90 Degree Square Tube Die for 105 Standard Duty and Heavy Duty Tube and Pipe Bender (26.0 mm OD, 177.8 mm CLR) Round Tubing 83 cubic inches oil/minute outputSpecs Outside Diameter of the Tubing (OD): 26. 0 mm Minimum Wall Thickness (Mild Steel): 0. 065" (1. 7 mm) Minimum Wall Thickness (Aluminum): Contact for Details Minimum Wall Thickness (Other): Contact for Details Maximum Wall Thickness: 0. 125" (3. 2 mm) Centerline Radius: 7" (177. 8 mm) Maximum Degree of Bend: 90, after springback Includes Steel Main Die Steel Backing Block Steel U Strap Resources Tube and Pipe Bending Basics What Am I Bending: The