Neck Angle Jig gauge IMPORTANT NOTE: Lengths are the

IMPORTANT NOTE: Lengths are the OVERALL LENGTH of the entire truss rod

Does not penetrate

non-porous surfaces should be roughened with coarse sandpaper to improve adhesion

The top routing plate of the jig pivots to conform to the angle of the body and neck and is locked in place with 2 screws on the side of the jig

for rounding Stainless Steel frets

Neck Angle Jig gauge IMPORTANT NOTE: Lengths are theThe Neck Angle Jig by Elevate Lutherie turns a common 648 stationary belt sander into a neck setting tool. No large, bulky jigs required. Simply attach the jig to your belt sander and use the adjustment knobs to set the pitch and angle of the neck. Built in lock knobs hold your settings while sanding. These knobs also make it easy to tweak your settings to get the perfect fit. *Custom assembly required to fit the jig to your sander. Hardware not