Seakeeper Ride Zinc Anode Kit [12833SP] Boat Outfitting | Tools Outdrive Anode Plate

Outdrive Anode Plate

Daisy chain cables attach seamlessly to the back of each display

pH neutral – won’t strip wax or coatings

Primed or painted surfaces

Flange Diameter: 2-1/8"

Seakeeper Ride Zinc Anode Kit [12833SP] Boat Outfitting | Tools Outdrive Anode PlateZinc Anode Kit The Actuators on each Seakeeper Ride controller have sacrificial anodes that need to be periodically inspected and replaced when about half of the anode has worn down. Installation Remove the blade by unscrewing the four (4) M8 1. 25 x 20mm screws and their washers. Unscrew the two (2) M4 0. 7 x 12 mm bolts holding the zinc sacrificial anode. Attach the new zinc sacrificial anode using the two (2) M4 0. 7 x 12mm bolts and tighten to 20